JAI CM-200GE-RA Product Description:

The CM-200GE is a monochrome progressive scan camera with 2 million pixels resolution and GigE Vision interface.

The camera outputs 25 full frames/second in continuous (free-run) mode and up to 24 frames/second in external trigger modes. Higher frame rates can be achieved by using the Partial Scan or Vertical binning modes.

The unique sequencer function makes it possible to change exposure time, gain and ROI on the fly.

The programmable GPIO allows flexible configuration of inputs/outputs as well as the timer/counter function Dimensions (HxWxL): 29 x 44 x 75 mm.

The CM-200GE-RA is a factory-installed Right Angle Adapter. The adapter enables the camera to “look” at a 90º angle and is designed for a range of inspection tasks where physical access on production lines is limited.

FEATURES

• Right Angled
• C3 Compact series
• 1/1.8” monochrome progressive scan camera
• 1620 (h) x 1236 (v) active pixels
• 4.4 µm square pixels
• 25 frames/second with full resolution
• Partial scan and vertical binning
• Unique sequencer function
• Programmable GPIO
• GigE Vision interface

Click Here to Add the JAI CM-200GE-RA to Your Cart

JAI CM-200GE-RA Technical Information

• Right Angled
• Sensor: 1/1.8” CCD
• Pixel Clock: 65 MHz
• Frame rate full frame: 25 frames/second
• Active area: 7.13 (h) x 5.37 (v) mm
• Cell size: 4.4 x 4.4 µm
• Active pixels:1624 (h) x 1236 (v)
• Color (CB-200 GE): Raw Bayer output, host based interpolation
• Read-out modes -
  Full: 1624 (h) x 1236 (v) 25 fps
  1/2 partial scan: 1624 (h) x 616 (v) 43.82 fps
  1/4 partial scan: 1624 (h) x 308 (v) 69.59 fps
  1/8 partial scan: 1624 (h) x 156 (v) 97.96 fps
  2/3 partial scan: 1624 (h) x 824 (v) 35.07 fps
  Vertical binning: 1624 (h) x 627 (v) 44.49 fps* (CM-200 GE only)
• Sensitivity (CM-200 GE): 0.21 Lux (On sensor, max. gain, shutter off, 50% video)
• Sensitivity (CB-200 GE): 0.7 Lux (On sensor, max. gain, shutter off, 50% video)
• S/N ratio: >50 dB(0 dB gain)
• Video output: GigE Vision, 8-bit or 10-bit
• Auto-iris lens video output: 0.7 Vp-p, enabled by internal switch
• Gain: Manual/Automatic -3dB to +12 dB
• Synchronization: Internal X-tal, External hardware trigger via GPIO Software trigger via GigE Vision
• Trigger modes: Continuous, Pre-Select Pulse Width, Sequence (Gain, Shutter, ROI), Delayed Readout
• Operating Temperature: -5°C to +45°C
• Power: 12V DC +/-10%. 4.2W
• Lens mount: C-mount
• Dimensions (H x W x L): 29 x 44 x 75 mm
• Weight: 125g

Click Here to Add the JAI CM-200GE-RA to Your Cart