JAI CV-M40 Product Description:

The CV-M40 is a monochrome double speed 1/2" progressive scan camera providing 60 full frames per second and up to 233 frames per second with partial scanning. The combination of partial scanning and double speed readout with progressive scan sensors opens up new possibilities of inspection and measurement tasks.

The camera can be set up by RS 232C or external switches, and includes three external trigger modes, vertical binning, and a frame delay readout mode. Applications include surface inspection, servo loops and motion analysis.

Dimensions (HxWxL): 40 x 50 x 80 mm

FEATURES

• 1/2" monochrome progressive scan
• 60 full frames/second
• 1/2 and 1/4 partial scan
• Three external trigger modes
• Set-up by RS 232C or switches

JAI CV-M40 Technical Information

• Scanning system: Progressive 525 lines, 60 frames/sec.
• Frame rate:
  Normal: 60 Hz, 648 (h) x 492 (v) pixels
  Vertical binning: 120 Hz, 648 (h) x 242 (v) pixels
  Partial 1/2: 106 Hz, 648 (h) x 240 (v) pixels
  Partial 1/4: 156 Hz, 648 (h) x 120 (v) pixels
  Partial 1/8: 200 Hz, 648 (h) x 60 (v) pixels
  Partial 1/16: 233 Hz, 648 (h) x 30 (v) pixels
• Line frequency: 31.468 kHz
• Pixel frequency: 24.54 MHz
• CCD sensor: Monochrome 1/2" Hyper HAD IT progressive scan CCD
• Sensing area: 6.4 (h) x 4.8 (v) mm
• Picture elements: 659 (h) x 494 (v)
• Effective pixels: 648 (h) x 486 (v)
• Cell size: 9.9 x 9.9 µm
• Resolution (horizontal): 480 TV lines
• Resolution (vertical): 486 TV lines
• Sensitivity on sensor: 0.23 Lux, Max gain, 50% video
• S/N ratio: >48 dB (AGC off, Gamma 1)
• Gamma: 0.45 or 1.0
• Gain Auto or manual: (0 to +12 dB)
• Video output: Composite VS signal 1.0 Vpp, 75 Ohm or Video without sync. 0.7 Vpp, 75 Ohm
• Operating temperature: -5°C to +45°C
• Humidity: 20 – 80% non-condensing
• Power: 12V DC ±10%. 0.5 Amp.
• Lens mount: C-mount
• Dimensions: 40 x 50 x 80 mm (HxWxD)
• Weight: 245 g