HITACHI KP-F2A Product Description:

The KP-F2 is a full frame shutter monochrome camera using a 1/3" CCD with sensitivity in the near infra red spectrum. The high performance camera boasts high resolution together with a broad array of functions, including multi-step electronic shutter, external horizontal and vertical synchronisation, field on demand and non-interlace scanning. Suitability for image processing is assured by the square lattice pixels on the CCD. Two models are available, type A with a full frame output at 1/30th second and type B with simultaneous output of separate odd and even horizontal lines in 1/60th second.

FEATURES:

• Sensitivity in the Near-Infrared Spectrum
• 1/3" Progressive Scan CCD Camera with Square Pixels
• 500 TV Lines of Resolution, 50db S/N
• Sensitivity of 0.3 Lux at f1.4
• Frame-on-Demand Mode
• Multi-Step Electronic Shutter Function
• Internal/External Sync Mode

HITACHI KP-F2A Technical Information

• Sensor pick up device: 1/3" frame transfer CCD
• Sensing scanning area: 4.87 (H) x 3.67 (V) mm
• Total number of pixels: 680 (H) x 500 (V)
• Number of effective pixels: 658 (H) x 496 (V)
• Pixel pitch: 7.4 (H) x 7.4 (V) um
• Scanning system: Progressive (1/30th second)
• CCD drive frequency: 14.1875 MHz
• Horizontal scanning frequency: 15.734kHz
• Vertical scanning frequency: 29.97Hz
• Sync system: Internal or external (automatic switching)
• Internal sync operation: 525 horizontal lines
• External sync input: HV/VD 4 to 6 volts p-p or sync 0.3 volts p-p. Input impedance 1kohm, frequency deviation ±1%, negative polarity
• Standard sensitivity: 30 lux @ f4 (3200K)
• Minimum illumination: 0.3 lux at f1.4 (with AGC on, gamma 0.45
• Electronic Shutter: off, 1/120th, 1/125th, 1/250th, 1/500th, 1/1,000th, 1/2,000th, 1/4,000th, 1/10,000th, selectable by external switch.
• Gamma correction: 0.45 or 1.0 (selectable by internal switch) Fixed gamma correction for 2 video lines
• Signal to noise ratio: 50dB
• AGC: Fixed or AGC on video 1 only (selectable by external switch)
• Video output: VS 1.0 volt p-p 75 ohms unbalanced. (video 0.7 volts p-p, sync 0.3 volts p-p negative)
• Frame/field on demand function: On/off externally switchable. One trigger and fixed shutter mode selectable by external switch
• Sensitivity selection:
  Video out 1: External switch selectable for fixed gain or external control
  Video out 2: Fixed gain
  Both outputs have fine adjustment by internal controls
• Lens mount: C
• Flange focal distance: 17.526 mm
• Ambient temperature and humidity:
  Operating: 0^o C to +40^oC, RH 90% or less
  Storage: -10^o C to +50^oC, RH 70% or less
• Resistance to vibration: 7G, 10 to 60Hz amplitude 0.98mm constant, 60 to 200Hz fixed acceleration variable amplitude, 10 to 200Hz 1 minute sweep for 30 minutes in 3 axes
• Resistance to shock: 70G (once each: up, down, left, right)
• Dimensions: 44(W)x44(H)x87(D)mm
• Weight: 170 grams (approx)
• Supply voltage: 12 volts dc +/- 1 volt
• Current consumption: 200 mA (approx)