HITACHI KP-F100A Product Description:

Compact size high resolution monochrome digital output camera with a 1.339 million square pixels CCD with frame on demand function, suitable for many image processing applications including, inspection, pattern recognition, high resolution image filing, license plate recognition and X-ray image processing and inspection.

FEATURES:

• High Resolution: Using a CCD with 1,300 x 1030 effective pixels
• High Resolving Power: 3.5 times better than 400,000 pixel cameras
• Square Pixels: Pixel size is 6.7 x 6.7 um
• 2/3" CCD: A wide range of lenses is available More suitable for microscopy
• Internal or External Sync Mode: Automatic switching to external sync
• Digital Video Output: EIA-644 single channel 10 bit 20.2MHz Analogue output for image confirmation
• Small in Size and Light in Weight:
  44 x 44 x 78 mm, 180 grams
• Multi-Step Electronic Shutter: Selectable from 1/30th to 1/50,000th second
• Frame on demand: Instant display of an image

HITACHI KP-F100A Technical Information

• Sensor pick up device: 2/3" interline CCD
• Sensing scanning area: 8.71 (H) x 6.90 (V) mm
• Total number of pixels: 1360 (H) x 1034 (V)
• Number of effective pixels: 1300 (H) x 1030 (V)
• Pixel size: 6.7 (H) x 6.7 (V) um
• Scanning system: Progressive Non-interlaced
• Aspect ratio: 5:4
• Horizontal scanning frequency: 12.528kHz
• Vertical scanning frequency: 12Hz
• Frame rate:
  12 frames per second (full pixel readout)
  24 frames per second (2V pixels simultaneous readout)
• Sync system: Internal or external (automatic switching)
• External sync input: HV/VD 5 volts p-p +/- 1 volt, negative, input impedance 1 kohm, frequency deviation +/- 1%
• Standard sensitivity: 400 lux @ f4, 3200K
• Minimum illumination: 1.0 lux at f1.4, no IR filter
• Electronic Shutter: off, 1/30th, 1/125th, 1/250th, 1/1,000th, 1/2,000th, 1/4,000th, 1/10,000th, 1/50,000th (selectable by external switch)
• Gamma correction: 1.0 (Analogue output only)
• Signal to noise ratio: 50dB (Analogue output)
• Video output: Digital output:
  EIA-644, data single channel 10 bit, 20.2MHz Analogue output: (for image confirmation) 1.0 volt p-p, 75 ohms unbalanced, video 0.7 volts p-p, sync 0.3 volts p-p negative
• Read out speed: Settable to single output at 12fps or dual output at 24fps
• Frame on demand function: With the frame on demand function, an object moving at high speed can be captured at the desired or fixed exposure time by supplying a trigger pulse at the desired timing. This function is effective to capture an object moving at high speed at the same position on a screen at all times. The KP-F100A has three modes of operation, fixed shutter mode, two trigger mode and sync non-reset mode.
• Lens mount: C
• Flange focal distance: 17.526 mm
• Ambient temperature and humidity:
  Operating: 0^o C to +40^oC, RH 90% or less
  Storage: -10^o C to +50^o C, RH 70% or less
• Vibration endurance: 29 m/s/s (10 to 55 Hz 30 minutes each on XYZ axes)
• Shock endurance: 294 m/s/s (vertical, horizontal, once each face)
• Dimensions: 44(W)x44(H)x78(D)mm
• Weight: 180 grams (approx)
• Supply voltage: 12 volts dc +/- 1 volt
• Current consumption: 290 mA (approx)
• Composition: Camera head (with IR cut filter), operation manual