HITACHI KP-F2B Product Description:

The KP-F2B is a full frame shutter monochrome camera using a 1/3" CCD with sensitivity in the near infra red spectrum. The high performance camera boasts high resolution together with a broad array of functions, including multi-step electronic shutter, external horizontal and vertical synchronisation, field on demand and non-interlace scanning. Suitability for image processing is assured by the square lattice pixels on the CCD. Two models are available, type A with a full frame output at 1/30th second and type B with simultaneous output of separate odd and even horizontal lines in 1/60th second.

FEATURES:

• Near Infra Red Spectral Response: The CCD peak sensitivity is in the 800nm region
• High Resolution: The CCD has 658(H) x 496(V) pixels
• Frame Shutter: The frame shutter improves the vertical resolution of moving objects
• Frame Output (KP-F2A): Independent full pixel output at 1/30th second
• Simultaneous Horizontal 2 lines output (KP-F2B): The non-interlaced signals of odd and even horizontal lines are obtained independently and simultaneously in 1/60th second These signal are available from either the two rear panel BNC connectors or the multi pin connector, but not both at once
• Multi-Step Electronic Shutter: Selectable in 8 steps from 1/60th to 1/8,000 second
• Frame/Field on demand: A trigger signal provides near instantaneous image output

HITACHI KP-F2B Technical Information

• Sensor pick up device: 1/3" frame transfer CCD
• Sensing scanning area: 4.87 (H) x 3.67 (V) mm
• Total number of pixels: 680 (H) x 500 (V)
• Number of effective pixels: 658 (H) x 496 (V)
• Pixel pitch: 7.4 (H) x 7.4 (V) µm
• Scanning system: Non-interlace (1/60th second)
• Horizontal scanning frequency: 15.734kHz
• Vertical scanning frequency: 59.94Hz
• Sync system: nternal or external (automatic switching)
• Internal sync operation: 262 horizontal lines (1 output line)
• External sync input: HV/VD 4 to 6 volts p-p or sync 0.3 volts p-p. Input impedance 1kohm, frequency deviation ±1%, negative polarity
• Standard sensitivity: 30 lux @ f4 (3200K)
• Minimum illumination: 0.3 lux at f1.4 (with AGC on, gamma 0.45)
• Electronic Shutter: off, 1/60th, 1/125th, 1/250th, 1/500th, 1/1,000th, 1/2,000th, 1/4,000th, 1/8,000th (selectable by external switch)
• Signal to noise ratio: 50dB
• AGC: Fixed or AGC on video 1 only (selectable by external switch)
• Video output: VS 1.0 volt p-p 75 ohms unbalanced. (video 0.7 volts p-p, sync 0.3 volts p-p negative)
• Field or Frame on demand mode:On/off externally switchable. One trigger and fixed shutter mode selectable by external switch
• Lens mount: C
• Flange focal distance: 17.526 mm
• Ambient temperature and humidity:
  Operating: 0º C to +40ºC, RH 90% or less
  Storage: -10º C to +50ºC, RH 70% or less
• Resistance to vibration: 7G, 10 to 60Hz amplitude 0.98mm constant, 60 to 200Hz fixed acceleration variable amplitude, 10 to 200Hz 1 minute sweep for 30 minutes in 3 axes
• Resistance to shock: 70G (once each: up, down, left, right)
• Dimensions: 44(W)x44(H)x87(D)mm
• Weight: 170 grams (approx)
• Supply voltage: 12 volts dc +/- 1 volt
• Current consumption: 200 mA (approx)