The Hitachi BE-IR30 is a black-and-white board camera using a CCD sensor having the sensitivity up to the near-infrared region, features a ultra small size, light weight and is most suitable for installing in various industrial image processing applications.
FEATURES
- 1/3' Near Infrared CCD Board Camera
- Spectral Response above 1000 nm
- 570 TV Lines of Resolution, 56 db S/N
- Sensitivity of 0.3 Lux at f1.4
- Electronic Shutter
- Field or Frame Integration
- Selectable Gamma and AGC
- Dimensions of 32 (W)) x 20 (H) x 32 (D) mm
- Without Lens or Lens Mount
BE-IR30 Technical Information
- Sensor pick up device: 1/3" interline transfer CCD
- Sensing scanning area: 4.9 (H) x 3.7 (V) mm
- Total number of pixels: 811 (H) x 508 (V))
- Number of effective pixels: 768 (H) x 494 (V)
- Pixel size: 6.35(H) x 7.4(V)
- Scanning system: 2:1 interlaced / 525 lines / 60 fields per second / 30 frames per second
- Scanning frequency: 15.734 kHz (H), 59.94Hz (V)
- Signal standard: EIA Monochrome
- Sync system: Internal
- Resolution: 570 (H), 485 (V) TV lines
- Standard illumination: 30 lux @ f1.4, 3200K
- Minimum sensitivity: 0.3 lux, f1.4 (AGC on Gamma = 1.0)
- Gamma correction: Set to on (Settable to off by component change)
- Signal to noise ratio: 50dB
- AGC: Maximum approximately 32dB, Set to fixed gain at factory
- Video output: Composite 1.0 volt p-p 75 ohms unbalanced. (0.7 volts p-p video and 0.3 volts p-p sync negative polarity)
- Electronic Shutter: Auto electronic shutter
- Integration mode: Field integration
- Ambient temperature and humidity:
Operating: -5o C to +45oC, RH 90% or less
Storage: -10o C to +60oC, RH 70% or less - Dimensions: 34 (W) x 34 (H) x 20 (D) mm
- Weight: 17 grams (approx)
- Supply voltage: 9 volts dc +/- 0.5 volt
- Current consumption: 160 mA (approx)
