DALSA/CORECO X64-CL iPro Product Description:

The X64-CL iPro is a highly versatile PCI frame grabber capable of acquiring images from two independent Base or one Medium Camera Link™ cameras and performing image transfers at rates up to 528MB/s. Its low cost, combined with its ability to support multiple tap configurations from both area and linescan cameras simultaneously; in addition to its on-board FPGA based processing (including Bayer decoding and real-time shading correction) makes the X64-CL iPro an ideal solution to a wide variety cost-sensitive applications where flexibility, performance and reliability cannot be compromised.

FEATURES

• Simultaneous acquisition from two Base or one Medium Camera Link cameras
• FPGA based processing including Bayer decoding and shading correction
• Supports acquisition for a wide range of cameras and formats
• Trigger-to-Image Reliability ensures secure image capture
• On-board Quadrature shaftencoder input
• Acquisition pixel clock rates up to 85MHz
• Low-Cost/High Performance

Click Here to Add the DALSA/CORECO X64-CL iPro to Your Cart

DALSA/CORECO X64-CL iPro Technical Information

• Board:
  Camera Link Specifications Rev 1.10 compliant
  Half length 64-bit PCI-X 66MHz compatible
  5V and 3.3V slot ready
• Acquisition:
  Supports two independent Base or one Medium Camera Link area or line scan cameras
  Acquisition pixel clock rates up to 85MHz
• Resolution:
  Horizontal Size (min/max): 8 byte/256K bytes
  Vertical Size (min/max):
  1 line/infinite lines for line-scan cameras
  1 line/16million lines/frame for area-scan cameras
  Variable length frame size from 1 to 16 million lines for area-scan cameras
  32MB onboard frame buffer memory
  Integrated advanced tap reversal engine allows independent tap formatting
• Pixel Format and Tap configurations:
  Supports Camera Link tap configurations for 8, 10, or 12-bit mono, RGB and Bayer cameras: For one Medium or two Base cameras in any of the following combinations: 3x8-bit/tap, 2x10-bits/tap, 2x12-bit/tap, 1x14-bit/tap, 1x16-bits/tap, & 1x24-bit/RGB For Medium camera - 4x8-bit/tap, 4x10-bit/tap, 4x12-bit/tap, 1x30-bit/RGB, & 1x36-bit/tap
• Transfers: Real-time transfers to system memory:
  PCI-X bus: 64 bits @ 66MHz
  PCI-64 bus: 64 bits @ 66MHz
  PCI-32 bus: 32 bits @ 33MHz
  Intelligent Data-Transfer-Engine automatically loads scatter-gather and tap description tables from the host memory without CPU intervention
• Controls:
  Comprehensive event notification includes end/start-of-field/frame/transfer
  Independent timing control logic for up to two Camera Link cameras
  Two independent TTL/LVDS trigger inputs programmable as active high or low (edge or level trigger)
  Two independent TTL Strobes outputs
  Two PC independent serial communications ports provide seamless interface to MS Windows applications
  Quadrature (AB) shaft-encoder inputs for external web synchronization
• Options:
  Optional general purpose IO module supports:
  8 inputs and 8 TTL outputs
  Inputs support TTL and 24V operations
  TTL outputs support PNP and NPN operations (superscript endnote 1)
• System Requirements: PCI-X or PCI-32 compliant system and 64MB system memory
• Dimensions: 8.27” (21 cm) Length X 4.20” (10.7 cm) Height
• Temperature: 0 °C (32 °F) to 55 °C (131 °F)
  Relative Humidity: up to 95% (non-condensing)
• Markings: FCC Class B- Approved
  CE - Approved

Click Here to Add the DALSA/CORECO X64-CL iPro to Your Cart