DALSA/CORECO PC2-CamLink Product Description:

PC2-CamLink is ideal for cost-sensitive applications. Compatible with one monochrome area or linescan Base Camera Link^TMcamera, the PC2-Camlink is a snap to interface to your vision system, thanks to the Camera Link standard and DALSA’s innovative visual status LED. When you connect the camera cable and external triggers, the PC2-CamLink’s bracket-mounted visual status LEDs provide an immediate visual indication that all signals are present and active. To further simplify setup, the PC2-Camlink provides direct power (5V or 12V) to your camera. The PC2-CamLink has been engineered within DALSA's exacting Trigger-to-Image Reliability technology framework to more reliably and efficiently control and monitor the entire image acquisition sequence.

FEATURES

• Variable frame length acquisition
• Supports infinite vertical length frame (8K pixels x infinite number of lines)
• Shaft encoder with tick divider
• Facilitates installation by providing visual status of the acquisition
• Separate inputs for 2 optocoupled/TTL and 2 LVDS triggers

Click Here to Add the DALSA/CORECO PC2-CamLink to Your Cart

DALSA/CORECO PC2-CamLink Technical Information

• Board: PCI - Half-slot rev. 2.1 compliant for 5V and 3.3V slots (32-bit, 33MHz)
• Acquisition: 1 Base Camera
  Area scan and linescan
  1 or 2 channels
• Scanning: 1-channel raster
  2-channel interleaved pixels
  2-channel interlines
  10, 12, 14-bit pixels promoted to 16-bit
  10, 12, 14, 16-bit pixels optionally truncated to 8-bit
  Pixel rate up to 66MHz
• Controls: Support for EXSYNC and PRIN on any of the four Camera Control (CC) lines (SW selectable)
  2 Trigger input SW selectable with debouncing (supports 2 Opto or 2 LVDS or 2 TTL)
  Quadrature shaft encoder (LVDS) with tick divider
  1 Strobe output TTL-level
• Data Formatting:3 x 8-bit ILUT
  Acquisition cropper
  YCrCb converter during PCI transfer
• Image Size: 8K pixel x 8K line for area scan
  8K pixel x infinite number of lines for linescan
  Variable frame length for linescan (level control or start/stop pulse control)
• Connectors: One MDR-26 for Camera Link
  One DB15 for trigger, strobe and +12V/+5V power (available on PCI bracket)
  One 26-pin header for Parallel I/O (flat cable to second slot)
• I/O: 119 general-purpose I/O pins, TTL level (8 input, 8 output, 2 strobes, 1 interrupt) with 2 soft-fused +5V power pins One RS-232C serial port, mapped as regular Windows COM PORT
• Miscellaneous: 2 LED status indicators: Acquisition and Trigger
• Software: Supported by Sapera LT and IFC
  Processing and analysis using Sapera Processing
  Microsoft Windows NT 4.0, Windows 2000 and Windows XP compatible
  Application development using Microsoft C/C++ DLLs or Visual Basic
• System Requirements: Intel®Pentium®III class CPU, 128 MB system memory, 30MB free hard drive space
• Dimensions: 6.675” (17cm) Length x 4.20” (10.7cm) Height (standard PCI half-slot card)
• Camera Power: 5V (up to 1.5A) and 12V (up to 0.5A) taken from PCI connector with auto-reset fuse
  Option to plug floppy power cable for more current (up to 1.5A)
• Temperature: 0° C (32° F) to 55° C (131° F)
  Relative Humidity: 5% up to 95% (non-condensing)
• Markings: FCC class B - pending
  CE class B - pending

Click Here to Add the DALSA/CORECO PC2-CamLink to Your Cart